Photoelectric Smoke Detector adopts a photo emitter and a photo sensor in sensing chamber, which is designed to block ambient light, but smoke can flow through it easily. Normally the photo sensor detects very little light from the photo emitter, but smoke causes the light inside the chamber to scatter, which results in more light to be detected by the photo sensor, and trigger an alarm.
LNG (Liquefied Natural Gas) and LPG (Liquefied Petroleum Gas) are commonly used in daily life for many families. Both are colorless and flammable. An explosion would be caused by a spark or a flame if they severely leak. To detect the leakage of natural gas, the detector should be placed at higher position near the ceiling, because natural gas is lighter than air. And for LPG, a proper location for detection is about 30cm above the floor, since it's heavier than air.
The IC161H is one of the most reliable optical smoke detectors on the market. It provides very accurate detection in its' monitoring area and is compatible with all traditional INFOCARE Wireless Security Systems as well.
The wireless design ensures an easy installation and low battery indication ensures constant vigilance.
The IC161H is work on the "hopping code system" so it has no dip switch's making it installable in seconds and able to accept a rotation of over 1000 000 different system code combinations.
The wireless design ensures an easy installation. IC165H is a natural gas and Mixed gas (LPG) detector.
The IC165H is work on the "hopping code system" so it has no dip switch's making it installable in seconds and able to accept a rotation of over 1000 000 different system code combinations